Send Message
Contact Us

Contact Person : Ina Chen

Phone Number : 0086-15168536055

WhatsApp : +8615168536055

Free call

NBSANMINSE SDR 1Mpa Oil Pump AC 380 Volt 50 Hz 0.25 0.5 L / Min Rated Flow Lubrication Pump for CNC machine

Minimum Order Quantity : 20 Price : Negotiation
Packaging Details : Plastic Bags , Boxes , Carton , Pallet or As Customer Advice Delivery Time : Negotiation
Payment Terms : L/C, T/T, Western Union Supply Ability : Negotiation
Place of Origin: NINGBO Brand Name: NBSANMINSE
Certification: ISO9001 Model Number: SDR

Detail Information

Pressure: 1.0 MPa Rated Flow: 0.25 , 050 L/min
Oil Tank Capacity: 3.0 , 4.0 , 6.0 , 9.0 L Voltage: AC380 V
Frequency: 50 Hz Power: 60 , 90 W
High Light:

pump lubrication system

,

industrial air filter regulator

Product Description

NBSANMINSE SDR 1Mpa Oil Pump AC 380 Volt 50 Hz 0.25 0.5 L / Min Rated Flow Lubrication Pump for CNC machine

 

 


Performance and characteristics

 

. The rated working pressure : equipped with overflow valve, prevent oil pump overload

 

. Without unloading function : oil pump stop working without unloading function, mainly used in the resistance type thin oil lubrication system

 

. Equipped with liquid level switch (closed lack of oil 10W/DC100V/0.5A), lack of oil tank signal output

 

. Pump with pressure switch (normally) open AC220V/2A DC36V/2A), to monitor the lubrication system is the main oil line block and the pressure loss (optional parts)

 

. Pump can match the PC-2 display controller, control the operation run and rest time (optional parts)

 

. Transparent resin oil tank

 

. Use the lubricant viscosity 32~2500cSt.

 

. Supporting distributor : SDPC Type metering, SDB Type distributor

 

Attention

 

. Pressure switch as much as possible installed at the end of the system main pipe, not within the oil pump, it can more correctly detected the lubrication system condition with main pipe blocks the flow and pressure loss

 

. If the host with PLC, should by the host PLC control oil pump run tie and rest tie, the oil pump without set controller; But if the host does not PLC or with PLC wiring is not convenient, the oil pump shall set the controller, the controller to the countdown control lubrication pump working cycle : run time and rest time.

 

. If the working power supply is not AC380V 50Hz, should indicate the power and HZ when order power supply

 

. The following for is not configured pressure switch and controller of the SDR series pump as an example illustrates the specific technical parameters, configuration has a pressure switch or the pump parameters is the same with the specification of the controller

 

. Example : the rated flow 0.5L/min, oil capacity 3.0L, Rated pressure 1.0MPa, the working power supply is AC380V50Hz, without pressure switch and controller of SDR series thin oil pump models for SDR5-31; lubrication pump with a pressure switch (optional), type of SDR5-31P; lubrication pump with a controller (optional), type of SDR5-31C; If the work is specific power requirement, when you order it should indicate the voltage and frequency, such as SDR5-31/400V60Hz.

 

 

Project Rated pressure (Mpa) Rated flow (L/min) Oil tank capacity (L) Electric machine parameter Code Type
Voltage (V) Frequency (Hz) Power (W) Revolving speed (r/min)
Model
SDR2.5-31 1 0.25 3 AC380 50 60 1350 1.With pressure switch model after P, Like SDR2.5-31P. 2.With controller model after C, Like SDR 2.5-31C. 3.Indicate the power, Like SDR2.5-31Z/AC400V60Hz.
SDR5-31 0.50 90 2700
SDR2.5-41 0.25 4 60 1350
SDR5-41 0.50 90 2700
SDR2.5-61 0.25 6 60 1350
SDR5-61 0.50 90 2700
SDR2.5-91 0.25 9 60 1350
SDR5-91 0.50 90 2700

 

NBSANMINSE SDR 1Mpa Oil Pump AC 380 Volt 50 Hz 0.25 0.5 L / Min Rated Flow Lubrication Pump for CNC machine 0

NBSANMINSE SDR 1Mpa Oil Pump AC 380 Volt 50 Hz 0.25 0.5 L / Min Rated Flow Lubrication Pump for CNC machine 1

 

You Might Be Into These
Get in touch with us

Enter Your Message

sanmin5@pneuhydr.com
+8615168536055
15168536055
fhtrust
0086-15168536055