Home ProductsPneumatic Pulse Valve

Ningbo Sanmin Import And Export Co.,Ltd.

Sanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN Type

    • Sanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN Type
    • Sanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN Type
    • Sanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN Type
  • Sanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN Type

    Product Details:

    Place of Origin: NINGBO
    Brand Name: NBSANMINSE
    Certification: ISO9001
    Model Number: SQG - Z - 20 / 25 / 15

    Payment & Shipping Terms:

    Minimum Order Quantity: 1
    Price: Negotiation
    Packaging Details: Plastic Bags , Boxes , Carton , Pallet Or As Customer Advice
    Delivery Time: Negotiation
    Supply Ability: 10000 PCS
    Contact Now
    Detailed Product Description
    Pressure: 0 . 3 - 0 . 6MPa Temperature: - 25 ~ 60 ℃
    Relative Humidity: ≤ 85 % Medium: Clean Air
    Voltage: AC220V / DC24V / AC110V / AC24V Customized Body: ADC 12 Die Cast

    Sanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN Type

     

     

     


    Technical Parameter                                                                                                                                     

     

      Right angle Embedded Inline Plug
    Design-pressure 0.3~0.8MPa 0.2~0.8MPa 0.3~0.8MPa 0.2~1.0MPa
    Working-pressure 0.3~0.6MPa 0.2~0.6MPa 0.3~0.6MPa 0.2~0.6MPa
    Ambient Temperature -25~60℃ Customized for lower or higher temperature
    Relative Humidity ≤85%
    Working Medium Clean Air
    Voltage AC220V/DC24V/AC110V/AC24V Customized
    Protection Class IP65
    Diaphragm Life Over One Million Cycles
    Cv/Kv Call us for detail

     


    Material Construction :                                                                                                                                  

     

    Body : ADC12 die cast

    Armature : 430 FR stainless steel

    Diaphragm : Nitrile or Viton

    Spring : 321 stainless steel

    Fasteners : 302 stainless steel


     

    Use period Failure phenomena Possible Reason Troubleshooting
    During installation and commissioning The valves cannot all be opened, but the leading part does act. Check the gas dome pressure to see if it is too low. Check the leakage
    Some valves do not work, but the others are normal. Check the valve coil connection and coil Replace the accessories
    The valves cannot all be closed. There is leakage. There is no way to establish a gas dome. Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves. Check the leakage
    Z-valve. The valve inlet and blowing muzzle are installed backwards. Re-install
    Some valves cannot be closed. There is leakage. There is some dirt or debris on the membrane, ii is blocking the moving iron core. Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.
    A valve closing is slowly. The membrane orifice is blocked. Dredge the membrane orifice
    During use period

    Some valves are leaking. The membrane cannot close tightly and the valve is always open a

    little.

    There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked. Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.
    Coil is hot and burned out. It has been turned on for too long. Check the working condition of the control system.
    Voltage exists but the valve does not operate. Membrane is damaged and the orifice is blocked. Replace the accessories in time.
    Ambient temperature is below -20℃. The valve is leaking and cannot open. Ambient temperature is too low and here is frost in the valve. Pay attention to insulation and maintaining proper temperatures.

    Sanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN TypeSanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN TypeSanmin Stainless Steel Solenoid Valve Pulse Jet 0.3MPa - 0.6MPa Working Pressure GOYEN Type


     

    Our products are high quality with 12 month guarantee ,and support paypal payment.

    Contact Details
    Ningbo Sanmin Import And Export Co.,Ltd.

    Contact Person: Ina Chen

    Send your inquiry directly to us (0 / 3000)

    Other Products