|
Product Details:
|
1.Stainless steel cylinder block, with end caps connected by a new riveting process, featuring small axial dimensions, light weight and elegant appearance.
2.Good performance, high reliability and strong corrosion resistance.
3.Oil-free (oil-lubricated is also available) lubrication, avoiding oil-gas pollution, and the oil mist lubricator can be omitted.
4.Both ends adopt adjustable speed pneumatic cushioning structure, suitable for occasions requiring large cushioning.
II. Model
Standard Type
![]()
With Switch Type
![]()
With Valve Type
![]()
With Valve and Switch Type
![]()
| ① | Cylinder Model | See Cylinder Performance Table for details | |||
| ② | Installation Form | See the diagram on the next page for details | |||
| ⑤ | Rear Cover Form | See the diagram on the next page for details | |||
| Code | S | P | K | ||
| Name | Basic Type | Axial Port | FD-13RV | ||
| ⑥ | Valve Operation Mode | A: Push Type when Energized | |||
| B: Pull Type when Energized | |||||
| ⑦ | Valve Operating Voltage | 5:AC220V 50HZ | |||
| 8:DC24V | |||||
| ⑧ | Switch Model | See Switch Performance Table for details | |||
| Code | K | H | |||
| Name | FD-03R | FD-13RV | |||
| ⑨ | Number of Switches | ||||
| ⑩ | Rod End Connection Accessories | See Diagram 10Y-1 for details | |||
III. Graphical Symbols and Appearance
![]()
| Variety | Standard Type | With Switch Type | With Valve Type | With Valve and Switch Type |
| Model | 10Y-1 | 10Y-1R | 10Y-1V | 10Y-1K |
| Cylinder Bore (mm) | φ8,φ10,φ12,φ16,φ20,φ25,φ32,φ40,φ50 | φ20,φ25,Φ32,φ40,φ50 | ||
| Maximum Stroke (mm) | Φ8,Φ10:200;Φ12,Φ16:300;Φ20,Φ25:400;Φ32:500;Φ40:600;Φ50:800 | |||
| Maximum Stroke (mm) | No Limit | 37 | No Limit | 37 |
| Operating Pressure Range (bar) | Φ8~Φ16:1~10;Φ20~φ50:0.5~10 | 1.5~10 | ||
| Proof Pressure (bar) | 15 | |||
| Operating Speed Range (mm/s) | Φ8~Φ16:50~500;Φ20~Φ50:50~700 | 50~500 | ||
| Operating Temperature Range (℃) | -25 ~ +80 (under non-freezing conditions) | |||
| Working Medium | Dry and Clean Compressed Air | |||
| Cushioning Form | Cushion Pad | |||
| Oil Supply | Not Required (Oil-lubricated is Also Available) | |||
| Parameter | 2/5 Way Single Solenoid Operated Directional Valve | |||
| Variety | A: Push Type when Energized | B: Pull Type when Energized | ||
| Rated Voltage | AC220V,50Hz;DC24V | |||
| Allowable Voltage Fluctuation | ±10% | |||
| Starting Current | AC220V,50Hz;0.028A | |||
| Holding Current | AC220V,50Hz:0.015A;DC24V:0.09A | |||
| Power Consumption | AC220V,50Hz:1.8W | |||
| DC24V:2.2W | ||||
| Insulation Class | B | |||
| Operating Pressure Range | 1.5~10bar | |||
![]()
![]()
2.Please refer to the installation forms and rod end connection forms of the 10Y-1 series for the installation forms and rod end connection forms of 10Y-3 with Φ25~Φ40.
Contact Person: Ina Chen
Tel: 0086-15168536055
Fax: 86-574-88915660