VSP152073

Product Description

9035034	solenoid valve core	D366LG83NNL1847	high-pressure proportional valve	D366LG83NNL1726	high-pressure proportional valve
B68G-NNK-MR3-NLN	oil-water separator	VSP152050	high-pressure valve group	VSP152031	cooling/recovery valve
VSP152041	pressure boosting/compensation valve	VSP152036/37	high-pressure check valve	VSP152070	pre-blow repair kit
VSP152071	mid-blow repair kit	VSP152072	exhaust repair kit	VSP152073	pilot valve

Provide the power and pressure required for bottle blowing.

High-pressure air pump/air booster: generate high-pressure air (typically 25-40 bar) required for blow molding.

Low-pressure air pump: provide air source for pre-blowing (lower pressure to make the preform expand initially) and machine action.

Air storage tank: store high-pressure gas to ensure stable air pressure during blowing.

Precise pressure regulating valve: Precise control of gas pressure in different stages such as pre-blowing and high-pressure blowing.

Solenoid valve: it controls the on-off and direction of the air circuit and is the core actuator of the automatic action.

Hydraulic pump station: provide power for the clamping mechanism(some models use pneumatic clamping, and there is no hydraulic system).Oil cylinder: open and close the die.

Seal ring/oil seal: it is located in the cylinder, oil cylinder, valve and other parts to prevent leakage of gas and hydraulic oil. It is a common vulnerable part.